Rettar 3D Radar Silo Scanners
360° radar scanning that maps the whole material surface, so you know the true volume and mass in every silo, even with cone-up, cone-down or sidewall build-up.

See the whole surface, not one point
Single-point sensors measure one spot. The Rettar 3DPro2300 scans the full surface in 3D and calculates coordinates, volume and mass in real time. That gives accurate “purchase, sales and inventory” figures for procurement, delivery planning and financial reporting.
- 360° scanning with no blind spots
- Warnings for ultra-high or ultra-low material levels
- Self-correction for installation angle
- Dual power and dual network redundancy
- View 3D images and reports on desktop, tablet or phone
- Integrates with ERP and management software
From two points to the full surface
Two-point scanning
Basic level readings that miss uneven surfaces.
Five-point scanning
Better coverage, but still gaps between points.
360° scanning
The complete surface with no dead angles, for true volume.
3DPro2300 technical data
| Frequency | 120–140 GHz |
|---|---|
| Material | Particles, powders and lump materials |
| Measuring range | 20 m, 40 m, 80 m or 120 m |
| Beam angle | 1.5° |
| Horizontal rotation | 0–360°, 1° steps (adjustable) |
| Pitch angle | −90° to 90°, 1° steps (adjustable) |
| Housing | 6061 aluminium alloy, nylon |
| Power | 24 VDC or 220 VAC, 8 W |
| Weight | 5 kg |
| Communication | Fibre optic, Ethernet or wireless |
| Mounting hole | From 190 mm |
Built for bulk materials
Grain and feed, cement, mining and metals, coal and power, timber, and food and beverage: any silo, yard or indoor stockpile where accurate inventory matters.
- Round, square and irregular silos
- Automatic inventory with configurable vessel shapes
- Reduces labour and improves stock accuracy

140 GHz radar, scanning 360°
The 3DPro 2300 uses ultra-high-frequency 140 GHz radar. Motors rotate the sensor through 360° to scan the material and walls inside the silo. Readings go to the host by optical fibre, 4G or 5G, which calculates level and volume and draws a 3D image of the surface.
- Up to 16,200 measurement points with no dead zone
- Unaffected by dust, build-up and noise
- Real-time surface level, volume and mass
- Wall build-up alarms to protect the structure
- Self-diagnosis for reliable, accurate results
- Outputs 4–20 mA, RS485, Modbus TCP or OPC to your control room

For grain, feed and heavy industry
Image processing, AI and 3D point-cloud modelling turn each scan into a clear picture of what’s in the silo. It suits grain, animal feed, cement, mining, coal, metallurgy, ports and pulp and wood.
Runs on 24 VDC, or 220 VAC with an electrical control box, and connects to other control modules for interlocked control.
Planning 3D scanning for your site?
Send us your silo sizes and materials and we’ll recommend the right range and mounting.
